Are you looking for a document? Click here to go to the Downloadcenter

EASY Abutments allow for the simple, time-saving fabrication of single crowns or bridges in esthetically demanding areas. The EASY Abutment line impresses with its range of collar and cone heights and its different angled geometries.

The prosthetics line provides a good range of tertiary parts (impression coping, temporary cap, etc.), which permit an efficient restoration at the abutment level. EASY Abutments can be shortened and the collar region can be milled in order to ensure the optimum basis for an esthetic setting of the crown/bridge. However, if the EASY Abutment has been milled, casting an impression and a temporary restoration at the implant level is necessary.

Instructions for use - EASY - THM61115

EASY Abutments

 

EASY Abutment 20°

 

Benefits at a Glance

  • Easy fabrication of single-tooth and bridge restorations
  • Straight or angled abutments in a variety of shapes and sizes
  • Versions with “emergence profile“ (e.p.) for the design of an esthetically pleasing crown emergence profile
  • Prefabricated accessory components for efficient treatment at the treatment chair
  • Modification of the abutments is possible


ART abutments are available in two basic designs, which provide an optimal combination of ease-of-use and customizing options to suit the exact conditions of the patient:
• ART Abutment: compatible with prefabricated SPI®EASY Abutment components for impression taking and temporary restoration for efficient restoration with ART Abutments.
• ART Grinding Abutment: provides a greater volume of material for creating fully customized abutments.

Instructions for use - ART - THM61135

ART Grinding Abutment

 

ART Abutment

 

Benefits at a Glance

  • Highly precise and fully customizable
  • Natural translucency with no metallic appearance
  • Biocompatible and resistant to plaque
  • Highest degree of precision and dependable mechanical strength
  • Two designs for optimum flexibility
  • Compatible with EASY system components

CAD/CAM Libraries
Instructions for use - Titanium Base for CAD/CAM - THM61123

 

Titanium Base with hexagon for CAD/CAM

 

Titanium Base bridge for CAD/CAM

Benefits at a Glance

  • Efficient digital fabrication without initial investment
  • Individual emergence profiles
  • Tooth-colored abutment-crown transitions
  • Cemented or screw-retained crown and bridge restorations are possible

VARIOflex

The VARIOflex abutment addresses a variety of clinical requirements offering flexibility in the choice and design of dental restorations.

The VARIOflex abutment can be used both for screw-retained and cement-retained  restorations. Thanks to the slim and solid design, this abutment is suitable for both posterior and esthetically challenging anterior situtaions.

The CAD/CAMabutments can be adjusted to the clinical situation and the material-specific requirements. The CAD library offers a selection of various cylinder heights with just one abutment in the digital production process. The abutments have been developed especially for restorations made of plastic, pressed ceramics, and zirconium oxide. They provide the best possible support for long and tall superstructures, as well as for deeply placed implants.

CAD libraries are available for the VARIOflex abutment. Detailed information can be found in the corresponding instructions for use.

CAD/CAM Libraries

Electronic instructions for use – VARIOflex - THM611119 

 

Benefits at a Glance

  • Part of digital workflow
  • Flexible choice of materials: plastic, pressed ceramics, metal and zirconium oxide
  • Prosthetic diversity with a single design
  • For high superstructures

The Milling Abutment for CAD/CAM type II makes it possible to create individually manufactured abutments. 

The milled abutment for CAD/CAM type II is machined in the Original Medentika® PreFace Abutment Holder in a suitable milling system. PreFace Abutment Holders can be ordered directly from the milling machine manufacturer. You can also obtain information on the use of the Medentika® PreFace Abutment Holder from your milling machine manufacturer.

CAD/CAM Libraries

Instructions for Use - Milling Abutment for CAD/CAM type I & II - THM61137

Milling abutment for CAD/CAM type II

 

Compatible milling machines:

  • Datron D5®
  • Dental Concept DC1/DC5®
  • imes-icore®
  • MB Maschinen Cobra Mill®
  • Primacon PFM 24 mediMill®
  • R+K®
  • Röders RXD®
  • VHF®
  • Wissner Gamma 202®

Benefits at a Glance

  • In-house production – reducing production steps and providing cost savings.
  • Original product manufactured by Thommen Medical – the quality and precision of the Thommen Medical implant connection is maintained for individualized abutments.
  • Efficient production – Serial machining of 6 blanks is possible in one setup.
Thommen Medical logo

This website uses cookies to improve user experience. By using our website you consent to all cookies in accordance with our Cookie Policy.